Freedom Wall Mount Replacement Parts
Freedom WM Parts
Freedom Wall Mount Parts
| Item # | Part Number | Description | Additional Information | Notes |
|---|---|---|---|---|
| ∞ | LEDs | Replacement parts for the LEDs including LED strips & other electronics | ||
| 1 | R001618XXX | End Cap, LH, Outer | ||
| 2 | R001619XXX | Gear Assembly, Manual Crank | 3 | |
| 3 | R001622 | Roller Tube End Plug, LH | Used with manual crank | |
| 4 | R001861XXX | Inner Endcap Assembly | Used with motorized | |
| 5 | R001651 | Motor Assy | 4,6 | |
| 6 | 610900-xxx.xx | Roller Tube | ||
| 7 | R001623 | Roller Tube End plug, RH | ||
| 8 | R001620XXX | End Cap, RH, Outer | ||
| 9 | R040792XXX | Plug | -005=white; -006=black; -291=satin | |
| 10 | R001811X-aa-xxx | Lead Rail | 1,2,9 | |
| 11 | R001624XXX | End Plate, Lead Rail, LH | ||
| 12 | R001625XXX | End Plate, Lead Rail, RH | ||
| 13 | R001621 | Ramp Kit, Leadrail | ||
| 14 | R001626 | Knuckle Assy, Case, LH | 5 | |
| 15 | R001627 | Knuckle Assy, Case, RH | 5 | |
| 16 | R001628 | Assy, Pivot, LH | 5 | |
| 17 | R001629 | Assy, Pivot, RH | 5 | |
| 18 | R001630 | Hardware Pack, Arm Attach, 1 Arm | ||
| 19a 19b 19c 19d 19e | R012530-TB56L R012530-TB68L R012530-TB76L R012530-TB79L R012530-TB94L | Spring Arm, LH Spring Arm, LH Spring Arm, LH Spring Arm, LH Spring Arm, LH | 2.2M 2.44M 2.57M – Used thru 05/2017 2.57M – Used 06/2017 & on 3M & longer | 5 5,10 5 5,10 5 |
| 20a 20b 20c 20d 20e | R012530-TB56R R012530-TB68R R012530-TB76R R012530-TB79R R012530-TB94R | Spring Arm, RH Spring Arm, RH Spring Arm, RH Spring Arm, RH Spring Arm, RH | 2.2M 2.44M 2.57M – Used thru 05/2017 2.57M – Used 06/2017 & on 3M & longer | 5 5,10 5 5,10 5 |
| 21 | R012530-TB94M | Spring Arm, Center | 4.5M and 5M Only | 5,8 |
| 22 | R001654-00X | Vertical Support Leg, LH | ||
| 23 | R001654-10X | Vertical Support Leg, RH | ||
| 24 | R001657 R00144 |
Flipper Latch Kit, Orange Flipper Latch, Gray NLA |
Replace with Orange Latch (R001657) |
7 |
| 25 | R00394 | Carport Foot | ||
| 26 | R019283—- | Bottom Bracket Kit | ||
| 27 | R001546-RP | Crank, Telescoping | ||
| 28 | 901072 | Crank Handle Clip | ||
| 29 | R001605 | Switch Kit | 6 | |
| 30 | R001969 | Arm Bumper | ||
| 31 | R019311—- | Hardware Pack | ||
| The following parts are not displayed in the diagram above. | ||||
| 33 | Canopy | Canopy Information | ||
2. –xxx = awning length (2.2m, 2.44m, 2.57m, 3m, 3.5m, 4m, 4.5m, 5m)
3. Gear Assy (item 2) includes gear and inner End Cap assembled. Parts not available separately.
4. Motor Assy (item 5) includes motor, bearing and one-way drive. Parts not available separately.
5. Attaching hardware not included with spring arm assemblies. Order item 18.
6. A motor upgrade kit (SR0097XXX) is available for manual crank awnings and includes motor assembly (item 5), switch kit (item 29) and attaching hardware.
7. Original vertical support legs use a gray flipper latch. Replacement latch kit is R00144. If leg has orange flipper latch, Use replacement latch kit R001657.
8. The middle spring arm is different than the outer arms. Center arms can be identified by the blue dot located on or near the case connector of the arm. Do not use center arms for replacing outer arms, do not use outer arm to replace the center arm.
9. For Item 10 (lead rail): X= Color; B=Black, W=White, S=Satin. aa = LED; LO= w/ LED outside, LI= w/ LED Inside, XX=No LED. xxx= product order length.
10. Starting in 2017, the 2.44m awning has a longer extension (80” and uses arms items 19d, 20d. Previous 2.44m awnings has a shorter extension (72”) and uses arms items 19b, 20b. If the extension is not known, measure the location of the arm mount relative to the endcap. Arms are not interchangeable between extensions.