Cart 

SideOut Kover III Replacement Parts

Item # Part Number Description Additional Information Notes
1 R001150XXX Bracket, Deflector Mount, Short (4.5″) 4.5″ 6
2 R001534 Spacer, 1/4″, Deflector Bracket    
3 R001151XXX Cover, Deflector Mount Bracket    
4 R001153XXX-xxx
R001338XXX-xxx
R001339XXX-xxx
Deflector Assembly
Deflector Assembly, LH
Deflector Assembly, RH
XL Only
XL Only
 
5 R001520XXX End Cap, LH Screw Cover Attach  
6 R001521XXX End Cap, RH Screw Cover Attach  
7 R001156 Roller Support   7
8 R001258 Center Support Plate includes cover attach pins / XL Only  
9 610400-xxx
33XXX
Roller Tube
Roller Tube
XL  
10 R001164 Idler Bearing, Roller Tube, LH    
11 R001165
R001165XL
Spring Assembly
Spring Assembly
XL  
12 R041481-001 Spring Sleeve, used with single slot roller tube    
13 R001169XXX-xxx
R001337XXX-xxx
Front Cover Assy
Front Cover Assy
XL 5
3,5
14 R001364 Bumper, Deflector, Rubber    
15 R001562 Bumper, Front Cover Pkg of 4, (24″) 4
16 R001186 Center Latch Pin used on 12′ or longer covers only  
17 Canopy Replacement Canopy Only   4
18 0157xxx Awning Rail   4
The following parts are not displayed in the diagram above.
19 R012711-00X Hardware Pack    

Notes: 1: XXX = Color; xxx = Length in Inches
2: The XL replacement Roller Tube Assy includes the roller tube halves, splice, rivets, end caps and pre-wound spring.
3: XL replacement cover includes both the LH and RH halves.
4: Set of four bumper guards (item 14) is included with canopy replacements.
5: Replacement covers mount with screws. If replacing an older cover that uses spring pins, it will be necessary to also order end caps (items 5,6).
6: Units 155″ or less (order length) uses 2 brackets. Units 156″-191″ uses 3 brackets. XL units 283″ or longer uses a quantity of 5 brackets.
7: Center support (item 7) is no longer used on units 10 feet or less.